Icolor 2-Step Standard Textile Transfer Media Kits

The iColor 2-Step Standard paper gives you the ability to transfer full color prints from toner heat transfer printers on to a variety of light and dark colored textiles and garments. Including white and fluorescent colors.

The translucent adhesive applied during the 2-step process increases durability, opacity and vibrancy on your finished product. For even more durability and a softer feel on the finished item, the use of rasterization and negative space in your design will enhance the stretchability and feel.

This specific paper works at a higher temperature compared to the iColor Premium paper, so some care must be taken when pressing onto some types of synthetic material, such as nylon or polyester. Spandex or lycra material is not recommended at this temperature.

iColor Standard Transfer paper is a weed-free system, ensuring little time is wasted picking and weeding your transfer prints. iColor® Media enables you to produce detailed, quality images while dramatically reducing your production time. This paper will also work with many popular color laser printers - please check with your printer manufacturer to be certain.

ICOLOR 2-STEP STANDARD PAPER ADVANTAGES:

• Great choice when transferring to dark garments
• Good amount of stretch in finished transfer
• A semi gloss finish instead of matte
• Very strong adhesive which helps prevent images from pulling apart from wear
• Lower cost for a great everyday choice for garment transfers
• Wash life of 40 - 50 washes when following wash instructions:
• Wash finished garments inside out in cold or warm water with low agitation
• Available in 8.27" X 11.69," 8.27" X 14," 8.5" X 17," 11.7" X 16.5," and 12.5" X 19"
• Sold in packs of 100

PRINT AND TRANSFER ONTO:

• Dark & light fabrics
• Blankets & pillows
• Most types of fabrics
• T-shirts and sweatshirts
• Aprons
• Mouse pads
• Sports apparel & bags
• Jackets
• And much more!

TWO STEP PROCESS:
The 2-step paper process requires an "A" sheet, the paper that is printed on, and a "B" sheet which is the adhesive/glue that bonds the toner to the garment. During the process, the adhesive on the "B" sheet only becomes "sticky" where the toner was printed when you press/marry the two sheets together, creating a self-weeding, or weedless process. The 2-Step process maximizes the wash life and durability of the finished product.

RASTERIZATION:
The process of adding dots and stripes of negative space within a RIP softer to soften your design feel on the garment. This also improves the washability and durability of the design, as well as saving you money by reducing the amount of toner used.