Your Cart Total
{{price(cart.subtotal - cart.discount)}}
FLUX Beam Air Pre-Filter 4-Pack
OVERVIEW
A pack of four individual pre-filters designed for use with the Beam Air Fume Extractor.
Why pre-filters?
Pre-filters act as the first layer of protection in air filtration devices. They are designed with the simple goal of preventing particulates, which are created during the laser engraving & cutting process, from escaping out of the exhaust port of your machine and into your workspace and the air you are breathing.
The manufacturer recommends that filters be replaced between every 10 to 30 hours to ensure maximum fume filtration & extraction.
TECH DOCS/DOWNLOADS
Fact Sheets
(Size: 132.4 KB)
A pack of four individual pre-filters designed for use with the Beam Air Fume Extractor.
Why pre-filters?
Pre-filters act as the first layer of protection in air filtration devices. They are designed with the simple goal of preventing particulates, which are created during the laser engraving & cutting process, from escaping out of the exhaust port of your machine and into your workspace and the air you are breathing.
The manufacturer recommends that filters be replaced between every 10 to 30 hours to ensure maximum fume filtration & extraction.
Fact Sheets
(Size: 132.4 KB)