Subli Glaze™ UV Protection Spray Coating 13.5oz

Subli Glaze™ UV Protection Spray Coating can be applied at the end of the sublimation process to add a layer of protection against ultra violet light and reduce the effects of UV image fade.

How to use Subli Glaze™ UV Protection Coating 400ml

• Shake the can well for 1 minute.
• Ensure the surface to be coated is clean, dry, and free from grease.
• Apply Subli Glaze™ UV Protection Coating smoothly and evenly, holding the can approx. 250mm (10?) from surface using light passes at room temperature.
• Air Dry for 24 hours. The substrate is touch dry in approx. 1 hour, and fully cured in 24 hours.

*Meant to cure in convection oven DESIGNATED for sublimation projects only. Do not use with a kitchen oven where food is prepared. Subli Glaze settings and results will vary based on each individual substrate. It’s recommended to test Subli Glaze on each substrate before production, as time temperature and settings vary per product. Since substrates vary we cannot guarantee performance or results. Hand wash only.

Subli Glaze™ has a shelf life of 2 years (opened or unopened).