iColor Select 2-Step Transfer & Adhesive Media Kit

The iColor 2-Step Select Transfer Media set gives you the ability to transfer prints from the Uninet iColor series of heat transfer printers (including white and fluorescent color prints) onto a variety of light and dark garments and apparel, in an easy weed free process.

The white adhesive applied as a result of the 2-step process enhances the color of your transfer, and increases the adhesion to your garment for maximum durability, opacity and vibrancy on your finished product.

Incorporating rasterization and negative space integrated into your design, as well as using the garment color as a mask, will also enhance the stretch limit and softness of your finished product.

The iColor 2-Step Select Series Transfer Media is considered the best choice of media when the softest possible hand/feel is required. This media is brighter than any other media on the market today and has the best color reproduction, especially when printing red.

This media has several advantages which complements UniNet?s robust line of transfer media.

• A matte texture instead of a shiny finish
• A very strong adhesive which helps prevent images from pulling/ripping apart
• Lower cost media is a great everyday choice for textile transfers
• Finished garments will last between 30 - 50 washes (depending on how it?s laundered)
• Compatible printers: iColor 560, iColor 550, iColor 600, iColor 650, iColor 800, OKI 711WT, OKI 8432WT, OKI 9541WT

Recommended wash: finished garments/apparel inside out in cold or warm water and low agitation.

Sold in packs of 100 sheets, and available in three sizes: 8.27" x 11.69" (A4), 8.27" x 17" (A4XL), and 11.7" x 16.5" (A3)