The DK3 digital mug press can print a mug with a full wrap-around handle to handle and top to bottom image. It can press images up to 5" high and as close as 1/2" from the handle. The press can open extra wide for easy and fast loading and unloading of mugs. It features a soft heater liner to compensate for less than perfectly straight mugs. The digital control system features an automatic digital timer and programmable presets.
The DK3 Digital Mug Press is a specialty press in the Digital Knight line of presses; exclusively for pressing mugs and drinkware products. The thick, solid steel framework and die-cast clamp assembly provide a heavy-duty framework for non-stop use. The clamp assembly can be adjusted for very heavy pressure, allowing for full bleed transfers on even the most demanding mugs. Finally - a mug press that compensates for less than perfectly straight mugs!
As with all Digital Knight presses, the DK3 utilizes a state-of-the-art digital control system with an unprecedented 3-year warranty on the heat-control electronics. With digital temperature, time, and programmable resets, cycle county, and may other features, the consistency and productivity of mug printing is maximized.
At the heart of the DK3 is the SuperCoil-Microwindingâ„¢ heater technology, a system of embedded heater windings that wind tightly and closely together throughout the entire platen for extremely even heat, fast recovery, and fast heat up times. The DK3 will start up in only a few minutes and runs constantly at the set temperature. The DK3 boasts an amazing 3-Year/3,000 mug warranty. Personalize drinkware with sublimation or heat transfer printing.
Features:
- Fully digital temperature control
- Automatic digital timer
- Programmable presets
- Solid steel welded framework
- SuperCoil-Microwindingâ„¢ heater technology
- Soft heater liner for accommodating inconsistent mugs
- Temperature readout accuracy of ±2°F
- User selectable end-of-cycle alarms
- Records number of pressing cycles done
- 3-year / 3,000 mug warranty on heat platen
- 3-year warranty on the control panel
- 1-year warranty on entire press
Personalize a Wide Array of Drinkware Types:
- Standard Mugs
- Water Bottles
- 11oz Latte Mugs
- 15oz Latte Mugs
- 16oz Latte Mugs
- Steins
- Travel Tumblers
See our New Top Trending Blanks for Sublimation Here >
Check Out Our Educational Webinars Here >
Equipment sales are final. No returns accepted on this item.
Weight | 26.000000 |
---|---|
UOM | EA |
Brand | Geo Knight |
Platen Size | 5" High and as Close as 1/2" From Handle |
Press Type | Mug/Drinkware Press |
Temperature Range | up to 420° F |
Time Control Range | 0-999 seconds |
Dimensions | 15"W x 13"H x 15"L |
Electrical | 450W / 4A / 120V |
Warranty | FREE lifetime tech support |
Platen Warranty | 3-year/3,000 mug |
Control Warranty | 3 Year Warranty |
For Use With | Cylindrical Items: 11 oz, 15 oz, 16 oz mugs, steins, and stainless steel travel mugs. |
Press Warranty | 1 Year Warranty |
Product Type | Drinkware Press |
Additional Information | Made in the USA |
Recommended Accessories | Sublimation Paper, Drinkware Blanks, Sublimation Printer, Heat Transfer Printer |
1 star
0%
2 stars
50%
3 stars
0%
4 stars
0%
5 stars
50%
- Excellent Press0 people found this helpfulI have had this press in production for a little over 3 years, Recently had to replace the Green thermal pad after pressing Ceramic mugs and many different tumblers. I purchase good quality Tumblers and Mugs and whatever you press it needs to be straight, this press doesn't do Latte Mugs and the heated platten isn't an interchangeable Platten. Overall I'm purchasing another one so that I can press more mugs per hour and have only good things to say about this press. I average about 10 Ceramic cups per hour per press, I figure if I can press 20 per hour I can then cut the cost of cups to the customer on case orders. Everyone wins.
- spots on images0 people found this helpfulimages are not transfering right, and the manual says that if you get this, then you should change the green pad, which i dont understand since it is brand new
Response from JPPlus
Thank you for your review, Jennifer. Also, thank you for taking the time to trouble-shoot your problem with our support team.
The DK3 digital mug press can print a mug with a full wrap-around handle to handle and top to bottom image. It can press images up to 5" high and as close as 1/2" from the handle. The press can open extra wide for easy and fast loading and unloading of mugs. It features a soft heater liner to compensate for less than perfectly straight mugs. The digital control system features an automatic digital timer and programmable presets.
The DK3 Digital Mug Press is a specialty press in the Digital Knight line of presses; exclusively for pressing mugs and drinkware products. The thick, solid steel framework and die-cast clamp assembly provide a heavy-duty framework for non-stop use. The clamp assembly can be adjusted for very heavy pressure, allowing for full bleed transfers on even the most demanding mugs. Finally - a mug press that compensates for less than perfectly straight mugs!
As with all Digital Knight presses, the DK3 utilizes a state-of-the-art digital control system with an unprecedented 3-year warranty on the heat-control electronics. With digital temperature, time, and programmable resets, cycle county, and may other features, the consistency and productivity of mug printing is maximized.
At the heart of the DK3 is the SuperCoil-Microwindingâ„¢ heater technology, a system of embedded heater windings that wind tightly and closely together throughout the entire platen for extremely even heat, fast recovery, and fast heat up times. The DK3 will start up in only a few minutes and runs constantly at the set temperature. The DK3 boasts an amazing 3-Year/3,000 mug warranty. Personalize drinkware with sublimation or heat transfer printing.
Features:
- Fully digital temperature control
- Automatic digital timer
- Programmable presets
- Solid steel welded framework
- SuperCoil-Microwindingâ„¢ heater technology
- Soft heater liner for accommodating inconsistent mugs
- Temperature readout accuracy of ±2°F
- User selectable end-of-cycle alarms
- Records number of pressing cycles done
- 3-year / 3,000 mug warranty on heat platen
- 3-year warranty on the control panel
- 1-year warranty on entire press
Personalize a Wide Array of Drinkware Types:
- Standard Mugs
- Water Bottles
- 11oz Latte Mugs
- 15oz Latte Mugs
- 16oz Latte Mugs
- Steins
- Travel Tumblers
See our New Top Trending Blanks for Sublimation Here >
Check Out Our Educational Webinars Here >
Equipment sales are final. No returns accepted on this item.
Weight | 26.000000 |
---|---|
UOM | EA |
Brand | Geo Knight |
Platen Size | 5" High and as Close as 1/2" From Handle |
Press Type | Mug/Drinkware Press |
Temperature Range | up to 420° F |
Time Control Range | 0-999 seconds |
Dimensions | 15"W x 13"H x 15"L |
Electrical | 450W / 4A / 120V |
Warranty | FREE lifetime tech support |
Platen Warranty | 3-year/3,000 mug |
Control Warranty | 3 Year Warranty |
For Use With | Cylindrical Items: 11 oz, 15 oz, 16 oz mugs, steins, and stainless steel travel mugs. |
Press Warranty | 1 Year Warranty |
Product Type | Drinkware Press |
Additional Information | Made in the USA |
Recommended Accessories | Sublimation Paper, Drinkware Blanks, Sublimation Printer, Heat Transfer Printer |
People Also Bought
We Recommend These Products

Affirm offers simple, transparent financing on equipment and supplies to help you reach your goals.

Quickspark is committed to your success and wants to be in your corner.
Learn more about our financing partners and how they can help you grow your business at jpplus.com/financing.
Showing 0 comments